Learn Why Keltech Products Perform Even in the Most Extreme Environmental Conditions
NEMA 4X Enclosures Made from Stainless Steel
For the most extreme environments, Keltech uses NEMA 4X enclosures. NEMA 4X water-tight, corrosion resistant enclosures are constructed from stainless steel for indoor and outdoor use and provide an additional level of protection for the heater against corrosion. They also provide protection for the heater against falling dirt, rain, sleet, snow, windblown dust, splashing water, hose-directed water, and the external formation of ice on the enclosure. NEMA 4X enclosures also protect people against access to hazardous parts of the equipment.
Back
Computer Interface Option For Remote Monitoring
Extreme environments may not allow on-site access to the heater. In these instances, Keltech can provide a computer interface option to keep your employees safe. A LED controller that can be programmed and monitored by connecting it with a personal computer or programmable logic controller (PLC) via serial communications.
Back
Explosion Proof Purge System
For extreme environments that require explosion proof protection, Keltech’s tankless water heaters in NEMA enclosures can be equipped with a purge system. Heat, moisture, dust and corrosion are eliminated by providing the enclosure with a slow but continuous flow of inert gas or dry compressed air. This process removes flammable gases or prevents the accumulation of ignitable dusts within the protected enclosure.
The Purge System:
• Reduces heat build-up in the enclosure
• Inhibits metal corrosion and reduces moisture buildup
• Provides continuous monitoring capabilities
• Eliminates large, heavy explosion proof enclosure
Back
Freeze Protection
Keltech’s freeze protection option protects the heater and internal components in sub-zero conditions. It allows the unit to function at –30ºF with an 11 mph wind. Freeze protection is only available with NEMA 4 or NEMA 4X options.
Back
Ground Fault
This safety feature detects electrical leakage from external sources to protect the equipment, electronics and the heat exchanger from being damaged in the event of a power fault.
Back
De-Ionized Water Solutions
Keltech’s tankless hot water heaters are A-rated for de-ionized water, chlorides, saltwater solutions, reverse osmosis water, caustic alkalis and many other applications. All Keltech large commercial/industrial heaters are available with an optional Teflon® like fluorocarbon protective coating on internal passageways. Fluorocarbon coatings protect the heat exchanger from corrosive environments.
Back
When Corrosion is a Concern
The TE2 Protection System protects all heat exchanger surfaces that come in contact with heated fluids. The caustic and acid resistance of TE2 is very good and the solvent resistance is excellent. To protect the heater from corrosion, Keltech constructs its electric heating elements of electro-polished and passivated Incoloy 800 sheathing. All plugs and fittings are stainless steel.
Back
When Fluid Purity is Critical
Keltech has developed a unique and exclusive protection system that meets the requirements for ultra pure water. To conform to FDA regulations governing direct food contact applications, the TE3 Protection System includes a fluorocarbon coating similar to the FDA approved Teflon® PFA on all surfaces and internal passageways that come in contact with the heated media. This is critical when you need to heat de-ionized water or to heat reverse osmosis water.
Back
ETL/cETL
Certified
The registered label for ITS Corporation, an international safety testing laboratory that tests and certifies Keltech tankless water heaters to UL499 and corresponding CSA standards. Keltech tankless water heaters are ETL/cETL certified.
Back
|
